OXVA VPrime 2 (Dual Mesh) Replacement Pods

Further Information

OXVA VPrime 2 (Dual Mesh) Replacement Pods

A pod kit is only ever as good as the coil sitting inside it, and the VPrime 2's dual mesh pods are what do the actual work of turning your e-liquid into flavour and vapour. When one starts tasting flat or burnt, swapping it for a fresh one takes seconds and brings the kit straight back to how it vaped on day one.

These are the genuine OXVA VPrime 2 Dual Mesh Replacement Pods, sold as a 2-pack, at £6.49 (inc. VAT). Pick 0.4Ω or 0.6Ω depending on which pod you get through fastest.

Why it's worth keeping a spare pack on hand

The VPrime 2 ships with one 0.4Ω pod and one 0.6Ω pod, which is enough to find out which resistance suits you, but not enough to keep the kit running once your favourite one wears out. A dual mesh coil generally lasts longer than the single-mesh coils in cheaper pod kits, but it's still a consumable, flavour fades, vapour production drops, and eventually it needs replacing rather than persevering with. Keeping a 2-pack of your preferred resistance in stock means you're never caught out mid-week with a burnt-tasting pod and no way to fix it.

Key Features

UniTech 3.0 dual mesh coils. Dual mesh construction heats e-liquid more evenly than a single mesh coil, which means a fuller flavour hit from the first puff. OXVA states this design delivers up to double the flavour and lifespan of a standard single mesh coil.

Genuine fit, no adapters needed. Built specifically for the OXVA VPrime 2 Pod Kit, these pods click straight into place with the same seal and connection as the pods the kit shipped with.

Choice of 0.4Ω or 0.6Ω. Buy whichever resistance matches your preferred draw, restock the tighter 0.6Ω for a nic salt setup, or the more open 0.4Ω for denser vapour on freebase or shortfill e-liquid.

2ml capacity, UK TPD-compliant. Matches the UK's maximum legal tank capacity for nicotine-containing e-liquid, so there's nothing to top up or work around.

Boost mode compatible. Switching the VPrime 2 to Boost mode fires both mesh elements in the coil together, effectively dropping the pod's working resistance (the 0.4Ω pod behaves closer to 0.2Ω, the 0.6Ω pod closer to 0.3Ω) for a noticeably stronger hit and denser vapour when you want it.

Leak-resistant seal. Uses the same upgraded seal as the pods supplied with the kit, designed to reduce the leaking that's common with older pod designs.

Side or top fill port with silicone bung. Quick to refill and reseals cleanly, so e-liquid stays where it should between fills.

Full Specifications

• Pack size: 2 pods per pack
• Compatible device: OXVA VPrime 2 Pod Kit only
• Resistance options: 0.4Ω or 0.6Ω (sold as separate variants)
• Coil type: UniTech 3.0 dual mesh
• Pod capacity: 2ml per pod (UK TPD-compliant)
• 0.4Ω recommended wattage: 28W to 38W (best with 50/50 or 70/30 e-liquid)
• 0.6Ω recommended wattage: 20W to 25W (50/50 e-liquid recommended)
• Fill style: Side or top fill port with silicone bung
• Boost mode: Supported, fires both mesh coil elements together

Dimensions and Weight

OXVA hasn't published separate dimensions or a weight for the pod cartridge on its own, which is normal for accessory pods, they're sized purely to slot into the VPrime 2's pod bay, so there's no separate footprint to plan around. For reference, the VPrime 2 device itself measures 11.3 cm (4.45 in) tall, 4.1 cm (1.62 in) wide and 2.8 cm (1.09 in) deep, and weighs 150 g (0.33 lb), and the fitted pod sits flush within that.

What's in the Pack

• 2x OXVA VPrime 2 Dual Mesh Pods, matched resistance (0.4Ω or 0.6Ω, whichever you select)

Note that these pods come empty. Fill with your own e-liquid before fitting, see our recommendations below.

Compatibility Guide

These pods are built specifically for the OXVA VPrime 2 Pod Kit and are not interchangeable with any other device.

Compatible device: OXVA VPrime 2 Pod Kit only. They do not fit the original OXVA VPrime, the Xlim range, or pod kits from other manufacturers.

Compatible e-liquids: Both nicotine salt e-liquids and standard freebase or shortfill e-liquids work well, which one suits best depends on the resistance you've chosen. See the recommendations and coil guide below.

Recommended E-Liquids

For the 0.6Ω pod (tighter, mouth-to-lung style draw), a nic salt e-liquid gives the smoothest throat hit at higher strengths without the harshness freebase nicotine can have at 20mg. Good options from our range include:

• Doozy Salts Nic Salt E-Liquids
• OXVA Ox Passion Nic Salt E-Liquids, OXVA's own juice range, tuned around the flavour profile of their pod coils
• VSAVI Nicotine Salts 10ml

For the 0.4Ω pod (denser, more direct-lung style draw), a 50/50 or high-VG shortfill gives thicker vapour and a fuller flavour hit. Browse our full Shortfill E-Liquids range to find a flavour and strength that suits how you're vaping.

Coil and Pod Guide

Choosing a resistance. If you're not sure which to reorder, check the pod currently fitted, the resistance is printed on it. Most ex-smokers and lighter vapers settle on the 0.6Ω for its tighter, cigarette-like draw, while vapers who prefer bigger clouds and a more open pull tend to stick with 0.4Ω.

How long a pod lasts. OXVA rates the UniTech 3.0 dual mesh coil at up to double the lifespan of a standard single mesh coil, though it doesn't publish an exact puff count. As a general guide rather than an OXVA figure, expect somewhere between 200 and 300 puffs of total coil life per pod, that's across several refills of the 2ml tank rather than from a single fill, before flavour starts to noticeably drop off, though this varies with wattage, e-liquid VG/PG ratio and how often you're vaping. A burnt or muted taste, a gurgling sound, or visibly darkened e-liquid in the pod are the usual signs it's time to swap.

m the VPrime 2's pod bay, fill the new one through its side or top fill port, leave it to sit for five to ten minutes so the wicking material fully saturates, then click it into place. Skipping the wait can give you a dry, burnt first hit.

Matching wattage to resistance. Keep the device's wattage within the pod's recommended range, running a 0.6Ω pod up near 38W will burn through the coil faster and can turn good flavour into a burnt one within days.

Usage Advice

Prime every new pod before use, five to ten minutes filled and resting is enough for the wicking material to saturate properly.

Fill little and often rather than right to the top in one go, e-liquid needs room to move inside the pod as you draw on it.

If you're switching e-liquid flavours or brands, fit a fresh pod first, residual flavour in a used coil can affect the taste of a new juice for the first few fills.

Store spare pods somewhere cool and dry, out of direct sunlight, and keep them in their packaging until you're ready to fill and fit them.

Frequently Asked Questions

Which resistance should I buy, 0.4Ω or 0.6Ω?

Check the pod currently fitted to your VPrime 2, the resistance is printed on it. If you're not sure which you prefer, the 0.6Ω gives a tighter, cigarette-like draw suited to nic salts, the 0.4Ω gives a more open draw with bigger vapour, suited to freebase or shortfill e-liquid.

Do these pods fit any other OXVA device?

No, they're built specifically for the VPrime 2 Pod Kit and aren't compatible with the original VPrime, the Xlim range, or any other device.

How many pods come in a pack?

Two, both the same resistance, either 0.4Ω or 0.6Ω depending on which you choose at checkout.

Do the pods come filled with e-liquid?

No, they're sold empty. Fill with your own e-liquid before fitting.

How long does one pod last?

Roughly 200 to 300 puffs as a general guide, though this depends on your wattage, e-liquid and how often you vape.

How do I know when to change the pod?

A burnt or muted taste, a gurgling sound when you draw, or visibly darkened e-liquid in the pod are the usual signs it's due for replacement.

Can I use nic salts and freebase e-liquid in the same pod?

You can, but it's worth fitting a fresh pod when you switch, residual flavour from a used coil can affect the taste of whatever you fill it with next.

What's the maximum nicotine strength I can use?

20mg (2%) is the legal maximum for e-liquid sold in the UK under TPD regulations, and also the highest strength we'd recommend for comfortable vaping in either pod.

Does Boost mode work with these pods?

Yes, Boost mode fires both mesh elements in the coil together, giving a stronger hit and denser vapour than the standard setting.

Do these pods leak?

They use the same upgraded seal as the pods supplied with the VPrime 2 kit, designed to reduce leaking, though keeping the device upright and not overfilling will help avoid it with any pod system.

Can I buy a mix of both resistances in one order?

Each pack is a single resistance, so if you want both 0.4Ω and 0.6Ω spares, add both to your basket separately.

Is it normal for a new pod to taste different from the one it's replacing?

Slightly, yes, a fresh coil can taste a touch sharper for the first few puffs until it settles in, this is normal and not a fault.

Do I need any tools to fit a new pod?

No, the pods click straight into the VPrime 2's pod bay by hand, no tools needed.

Will these pods work with the original OXVA VPrime kit?

No, the VPrime 2 uses a new Dual Mesh pod design that isn't interchangeable with pods made for the original VPrime kit.

Sources

• OXVA VPrime 2 official product page, for the UniTech 3.0 dual mesh coil flavour and lifespan claims referenced above.

Customer Reviews