Further Information

OXVA Xlim UniTech 3.0 ABT Replacement Pods (3 Pack)

The OXVA Xlim UniTech 3.0 ABT Replacement Pods are the matching pods for the OXVA Xlim Pro 4 Vape Kit, and the only Xlim pods that unlock its Anti-Burn Tech (ABT). With an ABT pod fitted, the Pro 4 tracks the e-liquid level and stops firing before the coil runs dry, so you get a refill prompt instead of a burnt hit.

Each 3 pack contains three 2ml top fill pods in one resistance. Choose 0.4ohm or 0.6ohm for a looser RDL draw and bigger flavour, or 0.8ohm and 1.2ohm for a tighter, cigarette-style MTL vape with nic salts.

Built on OXVA's UniTech 3.0 platform, the pods are designed for clean flavour, quick priming and improved leak resistance. They also fit other current Xlim kits, where they work as standard pods without ABT.

Key Features of the OXVA Xlim UniTech 3.0 ABT Pods

• Unlocks Anti-Burn Tech: In the Xlim Pro 4, ABT pods let the device detect low e-liquid, stop firing and show a refill alert. This helps prevent dry hits and protects the coil.
• UniTech 3.0 coil platform: OXVA's latest pod design, focused on flavour, fast priming (around 30 seconds, per OXVA) and multi-layer leak protection.
• Four resistances: Pick 0.4ohm, 0.6ohm, 0.8ohm or 1.2ohm to match how you vape, from airy RDL to tight MTL.
• 2ml top fill: A simple top fill port makes refilling quick and tidy. 2ml capacity in line with UK TPD rules.
• Easy to identify: ABT pods have four contacts on the base, an ABT mark underneath and a red silicone ring at the mouthpiece, so they are easy to tell apart from standard Xlim pods.
• Nic salt and freebase friendly: Works with both nicotine salts and freebase e-liquids.
• Wide Xlim compatibility: Fits the Xlim Pro 4 and other current Xlim kits, so one pod type can cover more than one device.
• Value 3 pack: Three pods per pack keeps you stocked up and lets you run separate pods for different flavours.

Specifications

Resistance and Wattage Guide

What's in the Box

• 3 x OXVA Xlim UniTech 3.0 ABT Replacement Pods, 2ml, in your chosen resistance

Compatibility

These pods are made for the OXVA Xlim Pro 4 Vape Kit, the device they are designed around and the one that activates their Anti-Burn Tech.

Not compatible with OXVA NeXlim or VPrime devices, which use different pods.

Recommended E-Liquids

• For the 0.8ohm and 1.2ohm pods, our Nicotine Salt E-Liquids give a smooth, satisfying MTL vape.
• V2 Platinum E-Liquids are a reliable freebase choice for the 0.6ohm, 0.8ohm and 1.2ohm pods.
• For the 0.4ohm pod, a lower-nicotine 50/50 or moderate High VG E-Liquid gives fuller vapour. Avoid very thick 100% VG blends in 2ml pods.

How to Fill and Fit Your Pod

1. Open the top fill port and fill with e-liquid, leaving a small gap at the top.
2. Close the port firmly and push the pod into your Xlim device.
3. Wait around 30 seconds for the coil to saturate before your first puff.
4. Set your wattage to the range printed on the pod base (see the table above).
5. In the Xlim Pro 4, refill when the ABT low-liquid alert appears.

Frequently Asked Questions

Are these pods compatible with the OXVA Xlim Pro 4?

Yes. The Xlim UniTech 3.0 ABT Pods are the dedicated pods for the Xlim Pro 4 and the only ones that enable its Anti-Burn Tech.

Will ABT pods work in my Xlim Pro 3 or other Xlim kit?

Yes. They fit current Xlim kits and vape as normal, but the Anti-Burn Tech only works in an ABT device such as the Xlim Pro 4.

Can I use standard Xlim pods in the Xlim Pro 4?

Yes, according to OXVA. They will fire normally, but you lose ABT protection. To get ABT, use these UniTech 3.0 ABT pods.

How do I tell an ABT pod from a standard Xlim pod?

ABT pods have four contact points on the base, an ABT mark underneath and a red silicone ring at the mouthpiece.

Which resistance should I choose?

0.8ohm or 1.2ohm for a tight MTL draw with nic salts; 0.6ohm for a balanced draw that suits MTL or RDL; 0.4ohm for an open RDL draw with lower-nicotine freebase.

What wattage should I use?

As a guide: 0.4ohm at 26-30W, 0.6ohm at 20-25W, 0.8ohm at 12-16W and 1.2ohm at 10-12W. Start at the lower end and adjust to taste.

How many pods are in a pack?

Three pods, all in the resistance you select.

How much e-liquid does each pod hold?

2ml, the maximum allowed under UK TPD rules.

Can I replace the coil?

No. The UniTech 3.0 coil is built into the pod, so you replace the whole pod when the coil is worn.

How long does a pod last?

Coil life depends on your e-liquid, wattage and how much you vape. As a general guide, most users get around one to three weeks from a pod. Sweet, dark liquids wear coils faster.

How do I turn ABT on or off?

With an ABT pod fitted in the Xlim Pro 4, press the fire button 8 times in quick succession.

Do the pods leak?

UniTech 3.0 includes multi-layer leak protection. Keeping the fill port closed firmly and not overfilling helps further.

Sources

ABT, UniTech 3.0 and compatibility details: OXVA Xlim Pro 4 official product page.

Customer Reviews