The Vapour2 TRINITY vaporiser offers a truly custom sub-ohm experience with the widest range of variable settings.
Interchangeable atomizers allow you to tailor the resistance of your device for PG or VG e-liquid blends with your choice of standard or sub-ohm technology. Use 1.2 ohm for PG e-liquids; choose from 0.8 ohm and 0.5 ohm* for VG blends. You can customise the voltage and temperature of your device to create the optimal vaporising environment for your preferred e-liquid. TRINITY features a variable output of 5-40 W and has four protection features for safer vaping. see specifications below.
The tank for your TRINITY holds up to 2 ML and features a convenient top fill design for easy refills. TRINITY is available in your choice of two colours: blue and black.
The Vapor2 TRINITY Kit includes:
- 1 Vaporiser
- 1 Tank
- 1 Standard Atomizer (1.2 Ω)
- 1 Sub Ohm Atomizer (0.8 Ω)
- 1 USB Charging Cord
- 1 User Manual
* 0.5 ohm not included with this kit, can be purchased separately.
- Operating Voltage: 3.2 – 4.2 V
- Operating Power: 5.0 - 40 Watts
- Temperature Control mode: 100 – 300 Degrees C
- Resistance: Bypass mode: 0.2 – 3.0 Ohms
- Temperature Control mode: 0.1 – 1.2 Ohms
- 5 Settings: Ni200, Titanium, SS316, power mode, and bypass mode
- Short circuit protection
- Low voltage protection
- Overheating protection
- Over-current protection
- Overtime vaping warning
Customer ReviewsWrite a Review
4 Reviews Hide Reviews Show Reviews
I've had a v2 ecig for some time, and bought this mod a few months ago now.
So far, it's been reasonably good, however the tank is prone to leaking. I know it's apparently not supposed to, but as there are fill holes in the top chamber and a clear path for fluid to run into the lower section, it is possible for thinner fluids to make their way into the bottom chamber when the fluid holes are open.
If you use it like I do - have it on the desk, take a drag, put it back down - the fluid holes are left open for a while, and liquid runs into the lower section.
If you close the fluid holes between drags and forget to open them, you burn the coil, taint the liquid and have to replace both liquid and coil to continue using the vape.
The tank design is a little fiddly to use, and it's quite fragile however it does work very well so long as you pay close attention to the liquid and airflow holes.
Vapour production is excellent, and if you fully charge the battery, it's good for a day of moderate use. The mod provides a lot of options for different coil types, but won't drive a coil over 40watt.
On the whole, I like the trinity mod, but I did replace the tank with an Aspire Cleito that has absolutely no leaking and is very sturdy. I still use the trinity tank for higher PG liquids, but the Aspire tank on a 0.4ohm coil which at 35watt is ideal for day to day use.
Good for Instruction: EMAIL FOR PERMISSION
5/4/2019 TJH 15:56 Call to customer Voicemail left, will try him again on Monday, email also sent today as requested
Im loving V2's products they are top quality, however this specific product has a leaking problem with it's tanks and provides a inconsistent experience, plz improve!
26/10/2018: I have arranged for our Vaping Guru to call Jerome to sort out the leaking problem as the device should not be leaking.
When I initially bought this Vape Kit it leaked so was extremely disappointed. However, once I tightened the screw on the bottom of the Vaporizer it has worked perfectly. Good battery life, nice compact size and produces a good cloud. Would like to see better instructions and a constant wattage output setting for consistency - minus 1 Star here.
Team V2 Response: We have now added a link on the page to the full instructions ...hope we get a star back!
For a beginner, it's a good product. Good vapour production, intense flavour, no leaking.
The most important con i find is that I can only find coils on the V2 website which are quite expensive and that the battery is quite low.
Team V2 Response. Make sure you charge the device fully when the Trinity display shows "Low Voltage" or "Weak Battery". The coils cost around £4.31 each and should last for 2 weeks or more for an average vaper. That's less than the cost of ONE tobacco cigarette/day. We feel that is good value and is line with most quality coils